Contact us for advice on column packing and other Bioprocess column questions
Contact usMost Recent Flipbooks
This document contains information regarding materials used to construct the EvolveD™ columns, their resistance to different solutions and extractables & leachables data.
EvolveD™ is a single use, ready to use bioprocess column format. Economical in design with GMP packing available. Designed for use with PBL and most other manufacturers adsorbents.
This manual describes the general operation of an Evolve™ 350 column fitted with 10mm i.d. tubing (High Flow kit)
The Evolve™ process columns have many additional accessories for the range including disposable valves & bubble traps, support brackets and connectors.
The Evolve™ column brochure contains technical and operational information on the Evolve™ range containing 70 mm, 100 mm, 140 mm, 200 mm, 250 mm and 350 mm column diameter columns.
The refresh kits replace all wetted components of the Evolve™ bioprocess columns, eliminating the risk of product carry-over and the requirement for cleaning validation of the chromatography columns.
General operating instructions for the Evolve™ 200 & 250 mm i.d. columns including specifications, chemical compatibility and spare part details to complement the semi disposable approach.
General operating instructions for the Evolve™ 350 column, including specifications, chemical compatibility and spare part details to support the semi disposable approach.
This binder contains validation support for all materials used to construct the Evolve™ bio-process columns. This includes material certificates for all wetted components to support the single use app
This document contains the validation support document for the Evolve™ bio-process column accessory: 4 Port 2 Way Valves.
This document shows the contents of each of the spare part kits available for the Evolve™ chromatography columns.
How to guide on fitting the bubble trap to an Evolve™ bio-process column. The bubble trap will prevent air being introduced into the column and will also dampen any pulsation caused by the pump system
Instructions for fitting the support bracket for the Evolve™ bio-process columns. The bracket can be used to support valves, tubing and other accessories.
The column isolation kit allows the Evolve™ bio-process column to be isolated from a chromatography system or pump thereby eliminating the possibility of introducing air and protecting the column.
The column flow reversal kit allows the flow of liquid through an Evolve™ bio-process column to be changed from down flow to up flow and vice versa, without the need to remove column tubing.
Instructions on how to fit adjustable column feet onto the Evolve™ 200, 250 & 350 bio-process columns.
Instructions for replacing wetted components for Evolve™ 70, 100 and 140 mm i.d. bio-process columns using a Refresh kit.
