This manual describes the general operation of an Evolve™ 350 column fitted with 10mm i.d. tubing (High Flow kit)
Evolve™ Semi-Disposable Columns Suitable for Campaign Use
Buy NowOther content in this Stream
This manual describes the general operation of an Evolve™ 350 column fitted with 6mm i.d. tubing (Low Flow kit)
This document contains information regarding materials used to construct the EvolveD™ columns, their resistance to different solutions and extractables & leachables data.
Operating instructions for the Evolve™ chromatography columns 70 to 140mm id. include specifications, chemical compatibility and spare part details to complement the semi disposable approach..
General operating instructions for the Evolve™ 200 & 250 mm i.d. columns including specifications, chemical compatibility and spare part details to complement the semi disposable approach.
Instructions for replacing wetted components for Evolve™ 200 and 250 mm i.d. bio-process columns using a Refresh kit.
Instructions for replacing wetted components for Evolve™ 350 mm bio-process columns using a Refresh kit.
Instructions for replacing wetted components for Evolve™ 70, 100 and 140 mm i.d. bio-process columns using a Refresh kit.
This binder contains validation support for all materials used to construct the Evolve™ bio-process columns. This includes material certificates for all wetted components to support the single use app
This document contains the validation support document for the Evolve™ bio-process column accessory: 4 Port 2 Way Valves.
This document shows the contents of each of the spare part kits available for the Evolve™ chromatography columns.
Instructions for fitting the support bracket for the Evolve™ bio-process columns. The bracket can be used to support valves, tubing and other accessories.
This kit allows the column the to be isolated from a chromatography system or pump, eliminating possibility of introducing air and protecting the column.
The column flow reversal kit allows the flow of liquid through an Evolve™ bio-process column to be changed from down flow to up flow and vice versa, without the need to remove column tubing.
