Scaling up Production capacity

December 15, 2017

Prometic Bioseparations (PBL) has been manufacturing high quality chromatography adsorbents on the Isle of Man since 1989. In a previous article we highlighted our intention to become the first GMP qualified chromatography adsorbent manufacturer. In this article we will update you on the expansion of our adsorbent manufacturing capacity.

PBL has been producing chromatography adsorbents, under cleanroom/GMP condition, at a scale of up to 280L batch volume, for over 25 years. A sustained increase in customer demand for Prometic’s chromatography products meant the existing capacity would not meet future requirements so in the latter half of 2013, plans to expand the plant were developed.

Over the last 3 years there has been major investment in Prometic’s Isle of Man manufacturing facilities to provide a significant increase in production scale from a maximum batch size of 2880L to 1,000L and an increased annual manufacturing capacity to over 35,000L. This makes Prometic one of the largest manufacturers of affinity adsorbents in the world.

Work began on the new production space in June 2014 which was constructed within the existing building foot-print in an area previously used as a warehouse (which was relocated to a new building). At the heart of the new production capacity are 2x 2,500L reactors and associated buffer tanks and plant equipment which enable the manufacture of individual adsorbent batches up to 1,000L in volume to be produces under GMP conditions.

The first stage of the project was the removal of existing floors and internal walls and installation of foundations and drainage for new rooms. During this initial phase a number of utilities and services had to be relocated and/or upgraded which included an overall power upgrade for the building and doubling of purified water production and storage capacity.

Once the internal floors and walls were constructed, HVAC, sanitary wall coverings and a chemically resistant resin floor finish were installed to create ISO class 8 clean rooms. All of Prometic’s chromatography adsorbents are manufactured in controlled environment clean-rooms which conform to ISO class 8 standard or better.

Once the walls and steel re-enforced concrete floors were completed it was time to install the reactors and mixing tanks. Owing to their size and weight a large crane was needed to lift the vessels into the building. To facilitate these lifts a section of external wall was removed and rebuilt after the vessels were moved into place.

Final positioning of the reactors and mixing tanks was undertaken using an A frame and hoist. Once in their final positions the installation process pipework, control systems and plant services could commence.

Process pipework was constructed from high-grade stainless-steel tubing and installed by highly skilled welders.

The reactors incorporate extensive automation and control systems to enable automatic operation of adsorbent manufacture. Such systems require significant instrumentation and sensor inputs and numerous automated valves.

To enable automation of adsorbent washing steps large volumes of wash buffer are required. Two 15,000L buffer tanks were installed to the external tank farm and connected to the production areas by a newly constructed pipe bridge.

To facilitate rapid heating and cooling of vessels a bespoke heating/cooling system was designed and installed. This system incorporates large capacity heating and cooling units capable of increasing or reducing the temperature of fully charged reactors and mixing tanks by 50 °C in approximately 2 hours.

On completion of plant construction in 2016, the significant task of plant Installation and Operational Qualification (IQ/OQ) commenced. This work was completed October 2017 at which time the new plant was taken over by Prometic and Process Qualification work (PQ) commenced.

From early 2018 PBL will commence routine manufacturing operations in this facility and be able to produce chromatography adsorbents with batch sizes of 1,000L manufactured to GMP standard in cleanroom facilities certified to ISO8. This makes Prometic Bioseparations one of the highest quality, largest volume affinity adsorbent manufacturers in the world.

Previous Video
An introduction to Prometic Bioseparations Ltd
An introduction to Prometic Bioseparations Ltd

A short introduction to the products and services of Prometic Bioseparations, a leading supplier of bespoke...

Next Video
Prometic Bioseparations
Prometic Bioseparations

A video looking at Prometic Bioseparations.

×

Receive the latest updates straight to your inbox!

First Name
Last Name
Thank you!
Error - something went wrong!